BNTTK - B INDEX MATCHING GEL, PART B AT-8955

  • MSDS: BNTTK
  • Manufacturer: AT AND T NETWORK SYSTEMS
  • Product Name: B INDEX MATCHING GEL, PART B AT-8955
  • National Stock Number: 6070-01-306-1845
Product Identification

Product ID:B INDEX MATCHING GEL, PART B AT-8955
MSDS Date:03/18/1991
FSC:6070
NIIN:01-306-1845
Kit Part:Y
MSDS Number: BNTTK

Responsible Party
AT & T NETWORK SYSTEMS
1 OAK WAY
BERKLEY HEIGHTS, NJ 07922
US

Cage: 0PWA9

Contractor
AT AND T TECHNOLOGIES INC,FEDERAL SYSTEMS DIV
20046 GREENSBORO, NC 27420 US

Telephone: 919-279-5411

Cage: 64959

Ingredients

PROPRIETARY INGREDIENTS

Fraction By Weight: 100%

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION OF SKIN AND EYES
ON CONTACT.
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:SKIN: REDNESS, ITCHING, DISCOMFORT. EYES:
REDNESS, TEARING, DISCOMFORT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. SEE DOCTOR. SKIN: WASH
EXPOSED AREAS WITH SOAP AND WATER. INHALATION; NONE. INGESTED: CALL
A DOCTOR.

Fire Fighting

Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, SAND, FOAM, DRY CHEMICAL (SODIUM
CARBONATE TYPE).
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:FIRE MAY PRODUCE IRRITATING AND/OR TOXIC
GASES AND AEROSOLS FROM DECOMPOSITION/COMBUSTION MAY BE PRESENT.

Accidental Release

Spill Release Procedures:MOP, SOAK OR WIPE UP WITH AN ABSORBENT
MATERIAL SUCH AS VERMICULITE OR SAND.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE BELOW 95F TO PROLONG SHELF LIFE.
DO NOT STORE NEAR, FOOD, BEVERAGE OR SMOKING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:RUBBER OR PLASTIC.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
AVOID CONTACT WITH SKIN, EYES, OR CLOTHES.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>302F,>150C
Spec Gravity:1.0
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID
Percent Volatiles by Volume:<2

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG MINERAL ACIDS, AND STRONG ALKALIS.
Stability Condition to Avoid:CONTACT WITH INCOMPATIBLES; CONTACT
PRODUCES A FLAMMABLE GAS.
Hazardous Decomposition Products:OXIDES OF SILICON AND CARBON, TRACES
OF INCOMPLETELY BURNED CARBON PRODUCTS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.